Product Categories

Tri Clamp to NPT Manifold Adapters

Tri Clamp x NPT Manifolds

Tri Clamp to NPT manifolds allow easy distribution of medium to multiple destination simultaneously, or conversely, can collect from multiple sources into one receptacle. While a similar manifold can be accomplished using Tees and Crosses, the additional fittings need to bring these together makes it a less economical solution than a simple one-piece manifold. Additionally NPT ball valves can be added to control the distribution or collection process.

National Pipe Taper (NPT)

NPT is a standardized fitting that is commonly used for joining pipe. Due to the tapered threads (wider diameter at the base of the threads, similar to a trapezoid) the male fitting will tighten the further it is threaded into the female. NPT follows the technical standards provided by the American National Standard Pipe Thread standards, often called national pipe thread, which is where the confusions with NPT arises, as NPT is specifically an acronym that refers to tapered pipe.

Determining NPT/NPS Size:

Sizing NPT/NPS is based on the nominal pipe diameter, and not the outside diameter (OD) of the threads. For example: A 1/2″ NPT male has an outside thread diameter of approximately 3/4″, but as stated the correct NPT size is 1/2″, including the counterpart female. Notice: While NPT and NPS threads may be joined together, their threads may not create a proper seal, be loose fitting, or not form an optimal connection.

We are professional manufacturers of tri clamp to NPT manifold adapters, we specialize in sanitary fittings for over 15 years!

Get a Quote