The agitators are used for mixing, dissolving, dispersing and maintenance processes in the food processing, cosmetic, pharmaceutical or chemical industries where powerful and high speed agitation is required.The agitators are usually installed in small to medium capacity tanks to handle low viscosity products. The stirrers have bearing supports made of stainless steel and are suitable for use in the pharmaceutical sector.
Parts in contact with the product 1.4404 (AISI 316L)
Retainer GYLON according to FDA 177.1550
Bearing support 1.4301 (AISI 304)
Surface roughness Ra ≤ 0,8μm (except for fairing)
aid agitator is deflected, or offset, by a deflector usually installed or centered in the tank in a current such that said offset itself prevents the rotation of the agitated product.The rotation of the propeller causes fluid to flow along the walls of the tank to the bottom and then to the surface of the product. The effect can be improved if the bottom of the tank is curved.The serrated propeller promotes dispersion of the product.
Design and Functionality
- Vertical agitator.
- Double lip seal.
- Double ball bearing support.
- The propeller is connected by thread
- and washers to the shaft; shaft is one-piece.
- IEC motor, speed 1500 rpm, IP 55, class F insulation.
- Marine propeller (type 10) or sawtooth propeller (type 4).
- Indicates operation under pressure or vacuum (-1 to 4 bar).
We are professional manufacturers of vertical agitator e type, we specialize in tank equipment for more than 15 years!